Week 8 (FYP 2)

-
Activity:
Refurbish Motor and Conveyor

Objective:
  • To allow the conveyor to move smoothly
  • To allow the motor to rotate properly
  • To look neater on the conveyor

Content:
  • Originally conveyors 1 and 2 did not move properly because the tension belts were already rusty.
  • So I had to loosen the conveyor belt and remove the tension belt to be cleaned and the roller replaced.
  • The roller on the tension belt is rubbed with lubricating oil to smooth the rotational movement.
  • After cleaning the roller, it needs to be reinstalled as original.
  • But I have adjusted the tension belt so that the conveyor is more tense and moves well especially the upper conveyor.
  • For the motor, I was clean up the connection and the mount
Result:
  • As a result, conveyors 1 and 2 can move well.
  • Conveyor 2 which is downward conveyer is move faster than upper conveyor because the it have less tensioner roller than upper conveyor. 
Conclusion:
Even though the upper conveyor is moving slowly, it can help the sensor to detect the metal plate better

Comments

Post a Comment

Popular posts from this blog

Week 11 (FYP 1)

-
Image
Activity: Design a Presentation Slide and Discussion with Supervisor Objective: to make a good presentation slide to prepare for the presentation in the 12th week to seek views and advice from supervisors Content: Make a presentation slide based on the FYP criteria set by the coordinator. The slide contains Introduction, Problem Statement, Literature Review, Methodology and Result. The section to be concerned about is a summary of the Literature Review After completing the slide, I met and discussed with Sir Shaiful to review the slide and give advice on the presentation later Result: After Sir Shaiful reviewed the slide, it gave an overview of the Flowchart section and Estimated costs on the project. Sir Shaiful also gave some advice during the presentation later. Conclusion: After being satisfied with the slide, I can proceed to the next task which is to record the presentation video to be played on the presentation day next week. The presentation will take place online at Micros...
Read more

Week 15 (FYP 2)

-
Image
Activity: Recording project demonstration. Objective: To produce a good and clear demonstration video. To produce a project demonstration video that can be understood by the evaluator. Content: Choose a suitable and quiet place to record a demonstration video. Make drafts and plans to record video. Choose the suitable angle for place of camera. Run the project and start recording. Result: The suitable place is chosen which in store room at groundfloor. The demonstration video was recorded with several different angles as there were several important parts running at one time such as the temperature sensor and the IR sensor. I need to add background voice of explanation because during recording, I cant make explanation because the sound of compressor is too loud. Conclusion: As a conclusion, successfully created video demonstration for online presentation which will attract the attention.
Read more

Introduction

-
  My name is Mohd Ikmal Shahrizal b Ab Razak. I am a student in UNIVERSITI KUALA LUMPUR BRITISH MALAYSIAN INSTITUTE (UNIKL BMI). My course is BACHELOR of ENGINEERING TECHNOLOGY (HONS) in ELECTRICAL. Basically, this blog is about my logbook or my progress report on my FINAL YEAR PROJECT that I've made will updated in this blog.  My project title is Development of  IoT System for Automation System
Read more